Cutter Spare Parts No. 105679 C-axis Drive Tooth Wheel Z=20, M=1,5 For Topcut Bullmer Machine

Product Overview

The C-axis Drive Tooth Wheel, Part No. 105679, is a replacement spare part listed for the Topcut Bullmer 7501 cutting machine. It is identified by its gear specifications: 20 teeth (Z=20) and module 1.5 (M=1.5).

When sourcing a replacement drive gear, matching the part number and tooth specifications is important. Even when two gears appear similar, differences in tooth count, module or other physical dimensions may affect whether they are suitable for the intended assembly.

This product page provides the key identification details for buyers, maintenance technicians and spare parts distributors looking for the C-axis drive tooth wheel used on a Bullmer 7501 machine.

Product Specifications

Key Identification Details

1. Part Number: 105679

Part No. 105679 is the primary reference for identifying this component. We recommend including this number in quotation requests, purchase orders and spare parts inquiries to help reduce the risk of ordering an incorrect item.

2. Gear Specifications: Z=20, M=1.5

The designation Z=20 indicates that the gear has 20 teeth, while M=1.5 specifies a gear module of 1.5. These are important identification parameters when checking a replacement gear against an existing component.

Please note that tooth count and module alone do not establish complete interchangeability. Other details, such as the gear's dimensions, mounting arrangement and original part reference, may also need to be checked.

3. Machine Application: Topcut Bullmer 7501

This part is listed for the Topcut Bullmer 7501 cutting machine. Before purchasing, compare the part number and specifications with the gear currently installed in your machine, especially if the machine has been modified or its assembly has previously been replaced.

Replacement Identification and Purchasing Guidance

If you are replacing an existing C-axis drive tooth wheel, the following checks can help confirm whether Part No. 105679 is the correct item:

• Check the part number: Compare 105679 with your spare parts list, maintenance records or original component information.

• Check the gear specifications: Confirm the 20-tooth configuration and module 1.5.

• Confirm the machine model: Verify that your equipment is a Topcut Bullmer 7501.

• Compare the original component: If the part number is unclear, provide a clear photo of the original gear and its mounting arrangement.

• Ask for confirmation if needed: Share any available dimensions or identification markings before placing your order.

These checks are particularly useful when purchasing replacement components remotely or sourcing parts for older cutting equipment.

Why Provide the Correct Part Number When Requesting a Quotation?

Using the correct part number makes communication between the buyer and supplier more efficient. For this product, referencing 105679 – C-axis Drive Tooth Wheel, Z=20, M=1.5 helps distinguish it from other gears that may look similar but have different specifications.

For maintenance teams and spare parts distributors, providing the machine model and available component details at the beginning of an inquiry can also help avoid unnecessary back-and-forth communication.

Frequently Asked Questions (FAQ)

Q1: What is the part number of this Bullmer C-axis drive tooth wheel?

The part number is 105679.

Q2: What do Z=20 and M=1.5 mean?

Z=20 indicates that the gear has 20 teeth. M=1.5 refers to its gear module, a parameter used to specify tooth size. Both details should be checked when identifying a replacement gear.

Q3: Which Bullmer cutting machine is this part listed for?

This C-axis drive tooth wheel is listed for the Topcut Bullmer 7501 cutting machine.

Q4: Can I use this gear on another Bullmer machine model?

Compatibility with other models has not been confirmed here. Please provide the machine model and original part number so that the application can be checked before ordering.

Q5: Are the tooth count and module enough to confirm compatibility?

Not necessarily. Although Z=20 and M=1.5 are useful identification details, other dimensions and mounting features may also affect compatibility. Comparing the original component or checking the machine's parts documentation is recommended.

Q6: What information should I provide when requesting a quotation?

Please provide the part number 105679, the machine model Topcut Bullmer 7501, and the required quantity. If available, include a photo of the original gear or its identification markings.

Q7: How can I check whether this is the correct replacement for my machine?

Compare the part number and gear specifications with the original component. If you are uncertain, send us the available machine and component details for further checking.

Q8: How can I obtain pricing and availability information?

Contact us with the part number, machine model and required quantity. We can then review your inquiry and provide a quotation based on the requested item.

Related Bullmer Cutter Spare Parts

You may also browse the following Bullmer cutting machine spare parts available on our website:

• Pneumatic Valve Island CP14-GE-MP-8 / CPV14-VI – Part No. 105910
  A pneumatic component listed in the Bullmer spare parts range.

• Flashing Light / Laser Light – Part No. 059091 / 70131764
  Another Bullmer machine component available for reference.

• Y-Axis Coupling – Part No. 70103178 / 70103173 / 062867
  A coupling listed for specified Bullmer machine models.

These are related products within the Bullmer spare parts range, not confirmed companion parts for Part No. 105679. Please check the individual product details for compatibility.

Request a Quotation

Looking for the C-axis Drive Tooth Wheel for your Topcut Bullmer 7501 cutting machine?

Send us your inquiry with the following details:

• Part Number: 105679

• Description: C-axis Drive Tooth Wheel, Z=20, M=1.5

• Machine Model: Topcut Bullmer 7501

• Required Quantity

If you have any doubts about the part identification, please include a photo of the original component. Providing accurate reference information helps us review your request more efficiently.